What Is Bypass Airflow?

If you have an air outlet that looks like this, you may bypass airflow. To fix it is to seal up the areas where the conditioned air is leaking out. Bypass airflow refers to a conditioned air leak that prevents properly conditioned air (usually cooled or temperature-controlled air) from reaching specific computer parts. Leaking air may escape through cabling holes, under cabinets in ceilings or through wall openings or holes. A loose connector on your computer's back or one that is not well sealed can allow bypass airflow. Computer fans come in many shapes and sizes, but they all work the same way. A fan creates an intake of air and forces it through a series of blades, which causes the air to accelerate. The greater the acceleration, the more air pressure is generated. Computer fans come in many shapes and sizes, but they all work the same way. A fan creates an intake of air and forces it through a series of blades, which causes the air to accelerate. The greater the acceleration, the more air pressure is generated. Computer fans are typically controlled by software, which allows the system to adjust the speed of the fans based on the current heat output. The fans run at a higher rate to generate more pressure as the heat increases. Bypass airflow is the real culprit of hot server rooms. In 2007, a study conducted by engineers from Upsite Technologies Inc. and Uptime Institute Inc. covered more than 15,000 measurements in 19 computer data centers of various sizes and capacities. Every room analyzed served more than the required cooling capacity, and the results reflected the same. It showed that one of the centers had 2. 7 times more cooling equipment than was required, while two other rooms had 16 times the regular cooling required. You're nothing if not thorough when it comes to airflow. The elimination of bypass airflow is critical to getting cold air to the right places, eliminating zone and vertical hot spots